PIAZZA™
COUNTERTOP SINK
VITREOUS CHINA
BARRIER FREE
PIAZZA™ COUNTERTOP SINK
• Made from vitreous china
• Self-rimming with cutout template supplied
• Large faucet deck and generous bowl
• Front overflow
❏ 0478.403 Faucet holes on 4" (203mm) centers
❏ 0478.803 Faucet holes on 8" (102mm) centers
(illustrated)
❏ 0478.001 center hole only
Nominal Dimensions:
23-1/2" x 18-3/8"
(597 x 467mm)
Bowl sizes:
18-1/2" (470mm) wide
11-3/4" (299mm) front to back
610mm
(24)
FINISHED WALL
OR SPLASHBACK
51mm
(2)
8"
2-3/4"
(70mm)
OPTIONAL
(203mm)
6-1/2" (165mm) deep
7"
(178mm)
Compliance Certifications -
Meets or Exceeds the
Following Specifications:
• ASME A112.19.2M for
Vitreous China Fixtures
• CAN/CSA B45 series
DRAWING FOR
203mm
18-3/8"
(467mm)
DIMENSIONAL
(8)
MIN.
PURPOSES ONLY.
IT IS NOT AN EXACT
REPRESENTATION.
845mm
(33-1/4)
686mm
(27)
MIN.
SEALING
COMPOUND
152mm
(6)
MAX.
23-1/2"
(597mm)
3/4"
(19mm)
COUNTERTOP
(BY OTHERS)
BARRIER FREE
CLEARANCE
229mm
(9)
7-3/4"
(197mm)
MIN.
*10-3/4"
(273mm)
*12-7/8"
(327mm)
SUPPLIES
AS REQ'D
31"
(787mm)
SUGGESTED
8"
(203mm)
1-1/4" O.D. WASTE
33-1/4"
(845mm)
1-1/4" O.D. TAILPIECE
To Be Specified:
❏ Color: ❏ White ❏ Bone
FINISHED FLOOR
❏ Linen ❏ Silver
❏ Fawn Beige ❏ Black
❏ Faucet*:
❏ Faucet Finish:
❏ Supplies:
❏ 1-1/4" Trap:
* See faucet section for additional models available
NOTES:
DIMENSIONS SHOWN FOR LOCATION OF SUPPLIES AND “P" TRAP ARE
*
SUGGESTED.
FOR COUNTERTOP CUTOUT AND INSTALLATION INSTRUCTIONS USE
TEMPLATE SUPPLIED WITH SINK.
FITTINGS NOT INCLUDED WITH FIXTURE AND MUST BE ORDERED
SEPARATELY.
MEETS THE AMERICANS WITH DISABILITIES ACT GUIDELINES
AND ANSI A117.1 ACCESSIBLE AND USABLE
SEALING COMPOUND SUPPLIED BY OTHERS.
BUILDINGS AND FACILITIES - CHECK LOCAL CODES.
IMPORTANT: Dimensions of fixtures are nominal and may vary within the range
of tolerances established by ANSI Standard A112.19.2. These measurements
are subject to change or cancellation. No responsibility is assumed for use of
superseded or voided pages.
Install lavatory 864mm (34") from finished floor.
Lavatory installed 51mm (2") minimum from front edge
of countertop provides 686mm (27") knee clearance.
J38
© 2008 AS America Inc.
Revised 2/08
|